Install David Lewis ™attic Pull-down Stair Hatch Cover Provide insulation and air seal of the hatch. Cover Is made with 4'' SilverGlo™ EPS foam board insulation. Encapsulate Duct System In Attic With Polyurethane Spray Foam According To Repair Seal and insulate ducts over existing insulation with 1" closed cell foam as follows: Tight 'N' True Foam Duct Encapsulation Install TiteShell™ Recessed Light Fixture Cover - Install over top of can light and seal with ZypFoam polyurethane foam around edge and any holes made for electrical wires. installation. Install TiteShell™ Can Light Covers Make Room(S) With Cathedral Ceiling More Comfortable Soffit vent is blocked with a continuous board. Gutter and fascia board are removed and each bay is dense packed with TruSoft™ cellulose. From the interior of the attic (200 Sq. Ft. of Roof to be insulated) Dense Pack Cathedral Ceiling With ruSoft™ Cellulose From Soffit/Fascia Install Layer Of 4'' SilverGlo™ Along Attic Deck Then Cover With 3/8'' Board Provide insulated storage platform with vertical insulation retention dams as needed to hold blown-in insulation in place. Use the existing wood in the attic Install SuperPlatform With SilverGlo™/OSB Reduce Air And Heat Leakage Through Kitchen Soffit Construct an air-tight cap over top of open soffit and seal with ZypFoam™ polyurethane foam. Seal Soffit With Wood/foam Board/expandable Foam Insulate Attic-adjacent Wall Install SilverGlo™ on wall and between floor joists as needed. Wrap skylights in 2" SilverGlo to air seal and insulate. Insulate Adjacent Wall With SilverGlo™ Air Seal And Insulate Attic Assembly Seal all accessible penetrations, top plates with expanding polyurethane foam. Blow in ProWool™ premium insulation as follows: R-60 17" of Pro Wool Insulation 16" and 24" on center for baffles Air Seal Floor With ZypFoam™ Insulate Attic Floor With ProWool™ Premium Insulation https://www.homeenvironmentsolutions.com/insulation/cellulose-insulation.html