Checking Outdoor Water Valves and Inspecting for Leaks

The outdoor water valves were inspected by first locating the main shutoff valve and any secondary valves controlling water flow to outdoor spigots, irrigation systems, or other outdoor fixtures. The valves were tested by turning them on and off to ensure they were functioning properly and that the shutoff mechanism was not stiff or damaged. Next, the water lines and fixtures connected to these valves were checked for signs of leaks. The outdoor spigots, irrigation pipes, and hose connections were carefully examined for any visible cracks, corrosion, or moisture around the fittings. Any wet areas or puddles were noted, and connections were tightened as needed to prevent leaks. If any leaks were detected, the affected area was marked for repair, and the necessary steps to fix or replace the damaged pipes or fittings were discussed. The system was tested by turning the water on and inspecting the flow and pressure at various points to confirm there were no leaks and the water flow was as expected.